|
|
PM8019 SPCve 16x6G
16-Port SAS/SATA Protocol Controller
Documents
> Are you seeing all
your results?
If you are a PMC-Sierra Customer or Partner you may have permission to see additional results.
Please log in to display additional results. |
|
Version |
Issue Date |
| No Results Found, please try your search again. |
Features
PRODUCT OVERVIEW
The Tachyon SPCve 16x6G is a highly-integrated 16-port SAS/SATA
1.5G/3G/6G Protocol Controller optimized for External
storage system applications (SAN/NAS/DAS) and native SAS/SATA HBA applications.
The PM8019 features StorClad™ encryption technology
which provides a high-performance, manageable and scalable
controller-based encryption solution.It provides application-programming interface
that is compatible with other members of the widely adopted
Tachyon SAS/SATA controller family.
The SPCve 16x6G provides system designers with end-to-end
diagnostics and error handling mechanisms to increase system
performance, availability and, most importantly, manageability.
Unique end-to-end features and algorithms can be achieved from
host to hard disk drive by using the SPCve 16x6G in combination
with PMC's market leading maxSAS family of SAS/SATA
expanders, multiplexers, and enclosure management solutions.
BENEFITS
- Highest density, lowest power/port SAS controller solution available
- Enterprise-class system performance, availability and
manageability
- End-to-end system diagnostics and error handling
mechanisms from host to hard disk drive
|
- Enables cost effective secure data SAS/SATA encryption
solution across both HDD and SSD devices
- FIPS 140-2 level 3 certifiable solution meets the most stringent
data security requirements
|
PRODUCT HIGHLIGHTS
- Minimal host CPU dependency boosts overall system
performance
- Wide target support enables high-performance, front-end SAS
applications or can be used for host-host failover coordination
- Support for wide-port initiator mode
|
- Hardware assist support for error recovery
- Verification, insertion and replacement of T10 Integrity Fields
(DIF) as defined by SBC-2
|
Encryption
- IEEE 1619 compliant line rate AES-XTS for Data-at-Rest
Encryption
- 256-bit key size supported
- FIPS 140-2certifiable
|
- Secure Key Encryption Key (KEK) management API
- Support for 4M Data Encryption Keys (DEKs) and 8 KEK (Key Encryption Keys)
- KMIP compliant Key Blob support
|
SAS/SATA Ports
- SAS initiator, SAS target, or SATA HBA operation on a per-PHY basis
- SSP, SMP, STP and direct attached SATA protocol support
- Each PHY supports up to 600 MB/s of bandwidth
|
- Initiator and target mode configurable on a per-PHY basis
- Hot-plug and SATA NCQ support
- SAS 2.1 optical support
|
PCI Express (PCIe)
- Eight lane native PCI Express-compliant 2.5 Gbit/s
(PCI Express 1.1), 5 Gbit/s (PCI Express 2.0), 8 Gbit/s PHYs
(PCI Express 3.0)
|
|
Statistics & Performance Monitoring
- Support for implementation of the advanced diagnostic
features listed below:
- Enhanced SAS error monitoring and fault isolation
|
- SAS topology monitoring and fault determination
- In-band communication with PMC-Sierra's maxSAS
expanders, multiplexers and enclosure management devices>
|
High-Speed I/O
- Independent per-channel selectable high-speed outputs
support multiple programmable levels of pre-emphasis and
output swing
- Independent per-channel selectable high-speed inputs support
multiple programmable levels of receive equalization
|
- Integrated resistive termination
- Automatic negotiation of link speed
|
T10 DIF
- Verification, insertion and replacement of T10 Data Integrity
Fields (DIF) as defined by SBC-2
|
|
Configurable Peripheral Interfaces
- Interfaces for NOR flash memory and SEEPROM
- Four multi-master Two-Wire Interfaces (TWIs) support variable
bit rates up to 400 Kbit/s
- Two industry-standard 16750 UARTs
|
- 4 SFF-8485 compliant Serial GPIO (SGPIO) ports
- 12 GPIO pins
|
Test & Control
Physical
|
- 27 mm x 27 mm 1071-pin FCBGA
|
Applications
- External RAID Storage Systems, NAS, DAS
- Host Bus Adapters
|
|
|